Product ID:COAL CAT AMINE COAL TAR COMP B, 97-643 (090893E)
MSDS Date:04/10/1995
FSC:8010
NIIN:00N065456
MSDS Number: CBCYR

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 340-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

DIETHYLENETRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 50-55%

OSHA PEL 1 PPM

ACGIH TLV: 1 PPM, S

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BUTYL ALCOHOL (NORMAL BUTYL ALCOHOL); (SARA 313) (CERCLA)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: C 50 PPM, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL IF SWALLOWED.
EYE: MAY CAUSE IRREVERSIBLE DMG. SKIN: MAY BE CORR. CONTAINS MATL
WHICH CAUSES SKIN BURNS. MAY BE ABSORBED THRU SKIN. PRLNG/RPTD CONT
MAY CAUSE ALLERGIC SKIN RXN. INHAL: VAP & SPRAY MIST HARMFUL IF
INHAL. MAY CAUSE IRRIT &/ALLERGIC RESP RXN IN LUNGS. VAP IRRIT
EYES,(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: NOSE & THROAT. RPTD EXPOS TO HIGH VAP
CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & CNS DMG.
INTENTIONAL MISUSE BY DELIBERATELY CONC & INHAL CONTENTS CAN BE
HARMFUL/FATAL. EYE WATERING, H DCH, NAUS, DIZZ & LOSS OF COORD
INDICATE THAT SOLV LEVELS ARE TOO HIGH. REDNESS, ITCH, BURNING
SENSATION & VISUAL DISTURB MAY INDICATE EXCESS EYE CONT. DRYNESS,
ITCH, CRACKING, BURNING, REDNESS, & SWE LLING ARE CONDITIONS
ASSOCIATED WITH EXCESSIVE SKIN CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 30 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER,
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQUIRED. IF
INGEST, ANY TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS
INFO AVAILABLE.

Flash Point Method:PMCC
Flash Point:84.0F,28.9C
Lower Limits:1.3%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
CLASS IC LIQ FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS TO PVNT PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO WHEN
EXPOS TO EXTREME HE AT. IF WATER USED, FOG NOZZ PREFERABLE.
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT SURF. TOX GASES MAY
FORM WHEN PROD CONT BY FLAME /HOT SURF.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIP W/PROPER
RESP, SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL IGNIT
SOURCES. TAKE UP SPILLED MATL W/SAND, VERMICULITE/OTHER NON-COMBUST
ABSORB MATL & PLACE I N CLEAN, EMPTY CONTRS FOR DISP. ONLY SPILLED
MATL & ABSORB SHOULD BE PLACED IN THIS CONTR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID LONG TERM & REPEATED CONT. DO
NOT STORE > 120F. STORE LARGE QUANTITIES IN BUILDINGS DESIGNED &
PROTECTED FOR STOR OF NFPA CLASS IC FLAMM LIQS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT SYS, READ MSDS
FOT OTHER COMPONENT/COMPONENTS BEFORE BLENDING, AS RSLT MIX MAY
HAVE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FA LL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
AIR PURIFYING/AIR SUPP (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTION S & LITERATURE CAREFULLY TO DETERMINE TYPE
OF AIRBORNE CONTAMINANTS AGAINST WHICH RESP IS EFFECTIVE & HOW IT
IS TO BE PROPERLY FITTED.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS < LOWEST SUGGESTED EXPOS LIM, LEL BELOW THE
STATED LIMIT, AND TO REMOVE (SUP DAT)
Protective Gloves:IMPERMEABLE GLOVES CONSTRUCTED OF: NEOPRENE RUBBER,
NITRILE RUBBER, (SUP DAT)
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES AND FULL LENGTH
FACESHIELD .
Other Protective Equipment:IMPERMEABLE APRON. EMERGENCY EYEWASH &
DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:DISCARD CONTAMINATED COTHING, SHOES OR GLOVES.
Supplemental Safety and Health
VENT: DECOMPOSITION PRODUCTS DURING WELDING OR FLAME CUTTING.
PROTECTIVE GLOVES: BUTYL RUBBER OR LATEX RUBBER.

Boiling Pt:B.P. Text:>241F,>116C
Vapor Pres:4.6
Vapor Density:HVR/AIR
Spec Gravity:0.89
Evaporation Rate & Reference:54 (BUTYL ACETATE=100)
Solubility in Water:54.4%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGS SECTION.
Percent Volatiles by Volume:50.44

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PROD WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING MAY PRODUCE FUMES INCL
CARBON MONOXIDE, OXIDES OF NITROGEN.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.